Features:
* Intelligent dedicated battery charger with USB output.
* When the battery is fully charged,automatically stop charging.
* Safety cut out circuit,Built-in protection circuit prevents overcharging.
* Constant current,constant voltage charging,automatic identification.
* The high-quality LCD screen indicates connection and full charge.
* Also convenient to interchange your spare batteries
* Use the data line which corresponds to mobile phone can be charged directly to the phone.
* Intelligent Chip: The smart chip protects from short circuit and overload by regulating voltage an ensuring a high effeciency charge.
Technical Specifications:
Input: AC 100-240V 50/60Hz 150mA
Output: DC 4.2V 400mA +/-50mA,USB Port Output: DC5.2V, 800mA(USB)
Connecter: US Plug
Short circuit and overload protection
Color: Black
Note: This Charger Just Fit For The Battery (32mm<=width<=66mm)
How does it work?
* Place your battery under the clip with battery contacts facing pins.
* Line up your battery&x27;s positive and negative contacts to the pins.
A: Most batteries are labeled positive (+) and negative (-).
B: If yours is not, start with the outside contacts.
* Slide the battery until the both pins are touching the battery contacts.
A: The LCD will light up if it has a good connection.
B: If not, adjust the pins and try again.
* The battery is fully charged when the LCD shows four solid bars.
Package include:
1x Universal Battery Charger with USB Output
Note:
* Do not plug the charger into the wall outlet yet.
* Align Connect pins with the contacts on your battery.
* For batteries with more than 2 contact points, start with the two outer contacts(left most and right most contacts).
* Now slide your battery into pins. Make sure contact pins are touching the contacts on your battery.
* "LCD" light indicates good connection,you have setup the charger correctly for this battery.
* If the "LCD" lights does not indicate good connection,slide to another battery connection.(not all batteries will work,this charges approx 90% all digital camera,cell phone and other msic batteries)
* Now plug the universal battery only charger into a wall outlet.
* The "LCD" light will start flashing while the battery being charged. If its not flashing its not charging
* The "FULL" LCD light will indicate a fully charged battery.
* Totally dead batteries will not be seen or charged